WATERPROOFING, THERMAL & ACOUSTIC INSULATION

DANODREN H10 is a high density polyethylene (HDPE) brown nodular sheet. Its main use is for protection and eventual vertical drainage.

DANODREN H15 is a nodular sheet composed of high density polyethylene (HDPE) of brown colour. Nodule height is [NO ENCONTRADO-//314303.ESP1@2]TEXTO [NO ENCONTRADO-//314303.ESP1:UD@2]TEXTO.

It is specially designed as drainage layer and for protection of underground walls.

DANODREN H15 PLUS is a high density polyethylene (HDPE) brown nodular sheet bonded by thermofusion to a nonwoven calendered polypropylene geotextile. Its main use is for protection and vertical drainage.

DANODREN H25 is a high density polyethylene (HDPE) brown nodular sheet. Its main use is for protection and eventual vertical drainage.

DANODREN H25 PLUS is a high density polyethylene (HDPE) brown nodular sheet bonded by thermofusion to a nonwoven calendered polypropylene geotextile. Its main use is for protection and vertical drainage.

DANODREN JARDÍN is a high density polyethylene (HDPE) green nodular sheet bonded by thermofusion to a nonwoven calendered polypropylene geotextile. Its main use is for protection and horizontal drainage.

Danodren R-20 is a nodular layer made of high density polyethylene (HDPE) in green colour, with 20mm height nodules with overflows.

Practicable manual opening skylight made of double 3mm thickness methacrylate dome, fixed to a 15 cm reinforced polyester basis, intended to overhead lighting and access to the roof. Dedicated to any roof in all types of buildings.

Practicable manual opening skylight made of double 3mm thickness methacrylate dome, fixed to a 15 cm reinforced polyester basis, intended to overhead lighting and access to the roof. Dedicated to any roof in all types of buildings.

Practicable manual opening skylight made of double 3mm thickness methacrylate dome, fixed to a 15 cm reinforced polyester basis, intended to overhead lighting and access to the roof. Dedicated to any roof in all types of buildings.

Practicable manual opening skylight made of double 3mm thickness methacrylate dome, fixed to a 15 cm reinforced polyester basis, intended to overhead lighting and access to the roof. Dedicated to any roof in all types of buildings.

DANOFELT PY 120 is a non-woven bonded by needle punching geotextile of 120, (+10%;-15%) g/m², composed of polyester short fibre.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

DANOFELT PY 150 is a non-woven bonded by needle punching geotextile of 150 (+10%;-15%) g/m², composed of polyester short fibre. It has the CE trademark.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

DANOFELT PY 200 is a non-woven bonded by needle punching geotextile of 200 (+10%;-15%) g/m², composed of polyester short fibre. It has the CE trademark.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

DANOFELT PY 300 is a non-woven bonded by needle punching geotextile of 300 (+10%;-15%) g/m², composed of polyester short fibre. It has the CE trademark.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

DANOFELT PY 400 is a non-woven bonded by needle punching geotextile of 400 (+10%;-15%) g/m², composed of polyester short fibre. It has the CE trademark.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

DANOFELT PY 500 is a non-woven bonded by needle punching geotextile of 500(+10%;-20%) g/m², composed of polyester short fibre. It has the CE trademark.

It is used for waterproofing protection of roofs, underground constructions and for land separation and filtration.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Fixed skylight made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended only for overhead lighting, Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

Practicable skylight made made of double 3mm thickness methacrylate dome, fixed to a 15cm reinforced polyester basis, intended for overhead lighting and access to the roof. Suitable for any roof in all kind of buildings.

It is a water-based bituminous emulsion specially designed to prime and prepare mortar, metallic sheets and wood before welding bituminous sheets in roofs.

It complies with the specifications required by UNE 104-231 (type EA).

ALU EXTRA 30 V2 - 20 KG (10X1) is a bituminous waterproofing sheet with metallic self-protection, LBM-20/M-NA (APP -5 ºC) type.
Composed of an polymer modified bitumen (pliability -5ºC) mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement.

Tested according to standard EN test methods.

ALU EXTRA 40 V3 - 30 KG (10X1) is a bituminous waterproofing sheet with metallic self-protection, LBM-30/M-NA (APP -5 ºC) type.
Composed of an polymer modified bitumen (pliability -5ºC) mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement.

Tested according to standard EN test methods.

ASFALDAN AL-80 TIPO 30 P ELAST. is a bituminous waterproofing sheet with metallic self-protection.
Composed of an SBS modified bitumen mastic, uses on the upper side of the sheet embossed aluminium foil (80 micron) in red colour as protective material. The anti-adhesive material used on the lower side is polyethylene film.

ASFALDAN ALU EXTRA 20 P ELAST (10X1) is a bituminous waterproofing sheet with metallic self-protection.
Composed of an SBS modified bitumen mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement.

Tested according to standard EN test methods.

ASFALDAN ALU EXTRA 30 P ELAST (10X1) is a bituminous waterproofing sheet with metallic self-protection.
Composed of an SBS modified bitumen mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film. It does not carry internal reinforcement.

Tested according to standard EN test methods.

ASFALDAN R TIPO 3 P POL is a bituminous Vapour Control Layer of 3.0 kg/m².
It has a aluminium foil reinforcement of 50 micron, and a polimeric modified bitumen compound, using an antiadherent polyethylene film in both sides.

Self-adhesive Tape SELF-DAN 10 cm is a waterproofing bituminous tape, 10 cm wide, with metallic self-protection (1.2 kg/m²). Composed of a SBS modified bitumen mastic, using as protective material on the upper side of the sheet aluminium foil (60 micron) in natural colour. The anti-adherent material used on the lower side is polyethylene film.

Used for small leaks, chimneys, in carpentry, etc.

Self-adhesive Tape SELF-DAN 15cm is a waterproofing bituminous tape, 15 cm wide, with metallic self-protection (1.2 kg/m²). Composed of a SBS modified bitumen mastic, using as protective material on the upper side of the sheet aluminium foil (60 micron) in grey colour. The anti-adherent material used on the lower side is polyethylene film.

Used for small leaks, chimneys, in carpentry, etc.

Self-adhesive Tape SELF-DAN 20cm is a waterproofing bituminous tape, 20 cm wide, with metallic self-protection (1.2 kg/m²). Composed of a SBS modified bitumen mastic, using as protective material on the upper side of the sheet aluminium foil (60 micron) in natural colour. The anti-adherent material used on the lower side is polyethylene film.

Used for small leaks, chimneys, in carpentry, etc.

Self-adhesive Tape SELF-DAN 30cm is a waterproofing bituminous tape, 30 cm wide, with metallic self-protection (1.2 kg/m²). Composed of a SBS modified bitumen mastic, using as protective material on the upper side of the sheet aluminium foil (60 micron) in grey colour. The anti-adherent material used on the lower side is polyethylene film.

Used for small leaks, chimneys, in carpentry, etc.

POLYDAN 180-30 P ELAST. is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and covered on both sides with a polyethylene film.

Tested according to standard EN test methods.

POLYDAN 180-35 AP ELAST. (11x1) is a waterproofing sheet made of SBS modified bitumen mastic and composed of a non-woven polyester felt reinforcement. Membrane with an upper surface finish of sand and a lower surface finish of polyethylene film.

POLYDAN 180-35 AP ELAST. (7x1) is a waterproofing sheet made of SBS modified bitumen mastic and composed of a non-woven polyester felt reinforcement. Membrane with an upper surface finish of sand and a lower surface finish of polyethylene film.

POLYDAN 180-40 P ELAST. is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and covered on both sides with a polyethylene film.

Tested according to the standards EN tests methods.

POLYDAN 50/GP ELAST. GREEN GARDEN is a waterproofing sheet made of SBS modified bitumen mastic. Composed of a non-woven polyester felt reinforcement and finished with green mineral slate on the upper face and a polyethylene film on the lower face. Bitumen is treated with special additives in order to deter root damage.

It is a stable bituminous emulsion in dark brown colour and doughy consistency. Composed of tiny bituminous particles in a water solution with an emulsifying agent. The latter contains certain SBS products that confer the MAXDAN CAUCHO dry film a perfect adherence, flexibility and elasticity.

It complies with the specifications required by UNE 104-231/88.

It is used for protection of walls, separating walls and foundations, deposits, etc., as well as vapour barrier. Can also be used for repairing old waterproofing systems.

IMPACTODAN 10 is a cross-linked polyethylene foam sheet, 10 mm thick. Its closed cell structure provides exceptional physical and mechanical properties.

It is used for acoustic insulation of deck impact noise in buildings. It presents high resistance to fatigue and is easy to install. Its use is guaranteed by the DIT N. 439 from the Spanish building science institute “Eduardo Torroja”.

IMPACTODAN 5 is a cross-linked polyethylene foam sheet, 5 mm thick. Its closed cell structure provides exceptional physical and mechanical properties.

It is used for acoustic insulation of deck impact noise in buildings. It presents high resistance to fatigue and is easy to install. Its use is guaranteed by the DIT N. 439 from the Spanish building science institute “Eduardo Torroja”.

IMPRIDAN 100 is a organic-based bituminous painting specially designed to prime and prepare mortar, metallic sheets and wood before welding bituminous sheets. Can be used both for horizontal and vertical surfaces.

It complies with the specifications required by UNE 104-234 (type I).

GLASDAN AL-80 TIPO 35 ELAST (10X1) is a bituminous waterproofing sheet with metallic self-protection.
Composed of a fibreglass reinforcement and covered on both sides with SBS modified bitumen mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film.

Tested according to standard EN test methods.

GLASDAN AL-80 TIPO 40 ELAST (10X1) is a bituminous waterproofing sheet with metallic self-protection.
Composed of a fibreglass reinforcement and covered on both sides with SBS modified bitumen mastic, uses on the upper side of the sheet embossed aluminium foil in aluminium colour as protective material. The anti-adhesive material used on the lower side is polyethylene film.

Tested according to standard EN test methods.

FONODAN 70 is an auto-adhesive band, 6.6 cm wide, composed of a Danosa acoustic membrane M.A.D. 2 (2 mm thick) with a non-foamed reticulated polyethylene finish, thermally bonded to the membrane.

It is used in combination with Fonodan BJ for acoustic insulation reinforcement of PVC hydraulic drainpipes in the gulley trap area, which is difficult to access.

ESTERDAN PLUS 50/GP WALKWAY RED MEMBRANE is a waterproofing bituminous sheet with self-protected surface of 5.0 kg/m².
Composed of a reinforced polyester felt reinforcement, covered on both sides with SBS modified bitumen mastic. On the upper side of the sheet, mineral protection in red colour is used as protective material. The anti-adhesive material used on the lower side is polyethylene film.

Membrane with no longitudidinal overlap used for demarcation / walkway areas.

Skylight for smoke evacuation, composed by a 1,5mm thickness and 300mm height galvanized steel plinth with thermal insulation, and a 10mm thickness cellular polycarbonate dome, installed with an opening system consisting on a thermal fuse and a 24v. electromagnetic bolt, that automatically triggers the system once reach 91ºC.

Skylight for smoke evacuation, composed by a 1,5mm thickness and 300mm height galvanized steel plinth with thermal insulation, and a 10mm thickness cellular polycarbonate dome, installed with an opening system consisting on a thermal fuse and a 24v. electromagnetic bolt, that automatically triggers the system once reach 91ºC.

Skylight for smoke evacuation, composed by a 1,5mm thickness and 300mm height galvanized steel plinth with thermal insulation, and a 10mm thickness cellular polycarbonate dome, installed with an opening system consisting on a thermal fuse and a 24v. electromagnetic bolt, that automatically triggers the system once reach 91ºC.