FONODAN 130 is an auto-adhesive band, 13.2 cm wide, composed of a Danosa acoustic membrane M.A.D. 2 (2 mm thick) with a non-foamed reticulated polyethylene finish, thermally bonded to the membrane.
|Nominal mass||330||gr/ml||EN 1849-1|
|Thickness tolerance||+/- 0,2 ||mm||EN 823|
|Length and width tolerance||1||%||EN 822|
|Insert Loss, IL (1)||> 17||dB||-|
|Dynamic stiffness||< 100||MN/m3||EN 29052-1|
|Hysteresis load||> 2||Nm||EN 3386-1|
|Compression set 24 h, 50% comp., 23ºC||< 35||%||EN 1856|
|Tensile strength: longitudinal||> 450||kPa||EN 1798|
|Work temperature||> 10||oC||-|
|Reaction to fire||B s1 d0||Euroclase||EN 13501-1|
|Cross-linked polyethylene thermal conductivity||0.050||w/mºK||EN 12667|
|Environmental Information||Declared Value||Units||Norm|
|Content of recycled raw material||14,4||%||-|
|Pre-consumer Recycled Content||100||%||-|
|Post-consumer Recycled Content||0||%||-|
|Manufacturing Location||Fontanar, Guadalajara (España)||-||-|
|Volatile organic compounds (VOCs)||15||µg/m3||ISO 16000-6:2006.|
Decree No. 2011-321 of 23 March 2011 the Ministry French Ecology, Sustainable Development, Transportation and Housing
The FONODAN 130 improves the insulation on the noisiest zones of the pipes, such as socket drain branch and socket drain bend
|ml / pallet||1120||ml|
|Rolls / pallet ||112||rolls|
The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product.
Orders are accepted in accordance with the terms of our current General Sales Conditions.
DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.
Website: www.danosa.com E-mail: firstname.lastname@example.org Telephone: +34 949 88 82 10