Self-adhesive Tape SELF-DAN 30cm is a waterproofing bituminous tape, 30 cm wide, with metallic self-protection (1.2 kg/m²). Composed of a SBS modified bitumen mastic, using as protective material on the upper side of the sheet aluminium foil (60 micron) in grey colour. The anti-adherent material used on the lower side is polyethylene film. Used for small leaks, chimneys, in carpentry, etc.
Technical Data
TECHNICAL DATA | VALUE | UNIT | STANDARD | Dangerous substances | PND | - | - |
Addtitional Technical Data
ADDITIONAL DATA | VALUE | UNIT | STANDARD | Mass per unit area (nominal) | 1.2 | kg/m² | - | Nominal thickness | 1.2 | mm | - |
Membranes thickness tolerance: = -0,3 mm, apart from membranes with thickness 2 and 2,4 mm whose tolerance is =-0,2 mm. Membranes mass per unit area tolerance: -5% (mini) and +10% (maxi) from nominal value.
Environmental Information
Environmental Information | Declared Value | Units | Norm | Pre-consumer Recycled Content | 0 | % | - | Post-consumer Recycled Content | 35 | % | - | Manufacturing Location | Fontanar, Guadalajara (España) | - | - | Volatile organic compounds (VOCs) | 50 (A+)* | µg/m3 | ISO 16000-6:2006 |
Scope
Self-adhesive Tape SELF-DAN 30cm is used for many types of repair:
- Used to seal around chimneys, outlets, penetrations gutters in any location where a waterproofing seal is required. - Can also be used around skylights, and exposed timber, cracks and fissures in copings and other construction elements. - Sealing hips, valleys, eaves, and exposed roof edges. - Can be used to seal around the passage of air and / or water in all types of construction elements, partitions, drywall laminates, fences, doors, windows, vents, construction joints, etc. - Sealing of thermal insulations boards. -Sealing of slopes and overlaps.
Presentation
PRESENTATION | VALUE | UNIT | Length | 10 | m | Width | 30 | cm | Packages | 4 | rolls | Product Code | 205023 | - |
|
 - aluminium foil (60 micron)
- SBS modified bitumen
- anti-adherent material
|
|
Advantages and Benefits
ADVANTAGES
- Totally impervious to moisture, water and water vapor. - Has a high degree of flexibility to accommodate most construction details. - Weather resistance at both low and high temperatures. - UV resistant.- Has strong adhesion on different types of substrates, such as concrete, cement, metal, tiles, thermal insulations boards (PIR, PUR, EPS, XPS, torchable mineral wool and other torchable thermal insulations boards). - Available in a range of colors for different applications. - Easy and quick installation, as no torch is necessary.
Instruction for use
Substrate Preparation:
- The base surface must be clean, dry and free of debris to provide maximum adhesion. - A bituminous primer may be needed depending upon the condition of the substrate. We recommend Curidan, Impridan 100, Maxdan or Maxdan Caucho. - In case of non-porous substrates we recommend that a test application is made to ensure correct adhesion. - In case of thermal insulations boards a primer is not necessary.
Product application:
-For ease of installation, it is recommended to cut rolls into smaller and more manageable size. -Remove the release liner and install whilst applying pressure onto the surface. Start from the center and spread to the outside edges. - The use of a roller is recommended to improve adhesion.
Indications and Important Recommendations
- It is recommended to have the surface pretreated with a primer (Curidán, Impridán 100, Maxdán o Maxdán Caucho). - External and support temperature should be checked before applying the product. It may be difficult to apply Self-adhesive Tape SELF-DAN 30cm below 5 ºC. - External and support humidity should be checked before applying the product.
Handling, Storage and Conservation
- This product is not toxic or flammable. - It must be stored dry and protected from rain, sun, heat and low temperatures. - It must be stored upright. - Don’t store two pallets high. - You must use the oldest batch of products first. - No waterproofing works should be performed when weather conditions may be unsuitable. These include snow or ice on the roof, heavy rain, moisture, when there are strong winds. - In all cases, the rules of health and safety at work and the rules of good construction practice should be considered. - To store in racking at height the shelves must have three stringers or beams under the wooden pallet. - Before handling the pallet you must check the status of the pallet and reinforce if necessary. - If you are using a crane for handling purposes, you must ensure protection for others as stated on our packaging. - Danosa advise you to consult the MSDS for this product which is available at www.danosa.com or may be obtained by writing to our Technical Department.
Warning
The information contained in this document and any other advice provided, are given in good faith, based on DANOSA's current knowledge and experience when products are properly stored, handled and applied, in normal situations and in accordance with the recommendations of DANOSA. The information applies only to the application (s) and the product (s) to which reference is expressly made. In case of changes in the parameters of the application, or in case of a different application, consult the DANOSA Technical Service before using the DANOSA products. The information contained herein does not exonerate the responsibility of the building agents to test the products for the application and intended use, as well as their correct application in accordance with current legal regulations. The product images used in our communications are indicative and may differ slightly in color and aesthetic appearance in relation to the final product. Orders are accepted in accordance with the terms of our current General Sales Conditions. DANOSA reserves the right to modify, without prior notice, the data reflected in this documentation.
Website: www.danosa.com E-mail: info@danosa.com Telephone: +34 949 88 82 10
dñlgkdñfgksdñlgksñdgkl
|
1.- Product and Company Identification
|
|
1.- Product and Company Identification
|
|
TRADEMARK: Self-adhesive Tape SELF-DAN 30cm PRODUCT TYPE: Self-adhesive tape of SBS modified bitumen, 30 cm wide. STANDARD UNE: EN 13707 MANUFACTURER/DISTRIBUTOR: DANOSA Calle La Granja, 3 28108 Alcobendas (Madrid, Spain) Phone number: +34 91 658 68 50
|
|
|
|
2.- Composition/Information on Ingredients
|
|
2.- Composition/Information on Ingredients
|
|
Sheet with bitumen, elastomers and mineral fillers.
|
|
|
|
3.- Hazards Identification
|
|
3.- Hazards Identification
|
|
Under normal conditions, the product is not dangerous. When applied to fire there is a risk of burn. Inhalation of bituminous vapours may cause irritation to respiratory system.
|
|
|
|
|
4.- First Aid Measures
|
|
Skin burns: Treat the affected area with plenty of cold water. When cold, do not try to remove bitumen from the skin, as it forms a sterile protective layer. Normally, the bitumen would separate itself from the skin after some days. Use only medically approved solvents (medicinal liquid paraffin) to remove bitumen from skin. Eye contact: Rinse with clean water for at least 10 minutes, keeping eyes opened. Consult an ophthalmologist. Vapour inhalation: Remove an injured person to fresh air and seek medical attention.
|
|
|
|
5.- Fire Fighting Measures
|
|
5.- Fire Fighting Measures
|
|
Use dry chemical powder or foam, inert gas fire hose, or water spray (mist).
|
|
|
|
6.- Accidental Release Measures
|
|
6.- Accidental Release Measures
|
|
At room temperature, material can be handled with no need for special precautions.
|
|
|
|
|
7.- Handling and Storage
|
|
Personal protection: Not required for handling and transport. When necessary to apply to fire, appropriate measures must be taken: fire gloves, protective shoes and cloths. Storage conditions: See label. Store under cover.
|
|
|
|
8.- Exposure Controls and Personal Protection
|
|
8.- Exposure Controls and Personal Protection
|
|
Respiratory protection: It is advisable to have good ventilation during its use. Eye protection: It is advisable to use protective glasses. Hand and skin protection: It is advisable to use heat resistant gloves and appropriate cloths.
|
|
|
|
9.- Physical and Chemical Properties
|
|
9.- Physical and Chemical Properties
|
|
Physical state: Laminar solid. Colour: grey. Characteristics of bituminous mastic: softening point: >80ºC penetration at 25ºC: 30-80 dmm insoluble in water partially soluble in organic solvent flash point: >240ºC Refer to a relevant technical data sheet for additional information.
|
|
|
|
10.- Stability and Reactivity Data
|
|
10.- Stability and Reactivity Data
|
|
Stability: Stable at room temperature. Conditions to avoid: Extreme temperatures. Temperatures over 80ºC modify the material and speed up its degradation.
|
|
|
|
11.- Toxicological Information
|
|
11.- Toxicological Information
|
|
The product is not toxic under normal conditions.
|
|
|
|
12.- Ecological Information
|
|
12.- Ecological Information
|
|
Persistence and degradability: Components of the product do not degrade significantly. Environment effects / ecotoxicity: The product is not toxic to the environment. It is not harmful for plants or aquatic environment.
|
|
|
|
13.- Disposal Considerations
|
|
13.- Disposal Considerations
|
|
Can be landfilled according to local regulations.
|
|
|
|
14.- Transport Information
|
|
14.- Transport Information
|
|
Commercialised as rolled sheets and transported loose or grouped in pallets. Stable at room temperature and during transport.
|
|
|
|
15.- Regulatory Information
|
|
15.- Regulatory Information
|
|
The product is not considered dangerous. The product does not require special labelling.
|
|
|
|
|
16.- Other Information
|
|
These products do not contain recycled raw materials. Even though, in different countries, like Germany, there is an experience in recycling wastes of these products. In Spain this issue has not been developed yet. THIS PRODUCT MUST BE STORED, HANDLED AND USED WITH ACCORDANCE TO THE PROCEDURES INCLUDED IN AN INDUSTRIAL HYGIENE RULES AND IN ACCORDANCE WITH THE LEGAL REGULATIONS UNDER THE RESPONSIBILITY THAT CORRESPONDS TO THE RECEIVER OR THE CLIENT. THE PUBLICATION CONTENTS INFORMATION BASED ON THE ACTUAL STATE OF OUR KNOWLEDGE AND INTENT TO DESCRIBE OUR PRODUCT FROM THE SECURITY REQUIREMENTS POINT OF VIEW. FROM THIS REASON IT MUST NOT BE INTERPRETED AS WARRANTY OF SPECIFIC PROPERTIES.
|
|
|
|