IMPERDAN FP 40 GP   
Mineral self-protected sheets
 
 
 
IMPERDAN FP 40 GP is a waterproofing bituminous sheet with self-protected surface of 4.0 kg/m², LBM-40/G-FP (APP -5 ºC).
Composed of a reinforced polyester felt reinforcement, covered on both sides with polymer modified bitumen (pliability -5ºC) mastic. On the upper side of the sheet, mineral protection in grey (black) colour is used as protective material. The anti-adhesive material used on the lower side is polyethylene film.
Tested according to standard EN test methods.

 CE Marking

Identification number of the Certification Body: 1035

DERIVADOS ASFALTICOS NORMALIZADOS S.A.
Calle La Granja 3 (28108 - Alcobendas, MADRID)

Year in which the CE marking was affixed: 2009
Certificate number CPF: 1035-CPD-ES044104
European standard UNE-EN 13707 and UNE-EN 13969 (A) and (T).

Produced at: Polígono Industrial Sector 9 (19290 - FONTANAR, Guadalajara)

Membrane of 1 m x 10 m x 4.0 kg/m² composed of polymer modified bitumen (pliability -5ºC) with reinforced polyester felt. Membrane with an upper surface finish of mineral granules and a lower surface finish of polyethylene film. Torch-on application.

TECHNICAL DATAVALUEUNITSTANDARD
External fire performanceBroof(t1)-UNE-EN 1187; UNE-EN 13501-5
Reaction to fireE-UNE-EN 11925-2; UNE-EN 13501-1
WatertightnessPasa-UNE-EN 1928
Longitudinal tensile strength700 ± 200N/5cmUNE-EN 12311-1
Transversal tensile strength450 ± 150N/5cmUNE-EN 12311-1
Longitudinal elongation at break25 ±15%UNE-EN 12311-1
Transversal elongation at break25 ±15%UNE-EN 12311-1
Resistance to root penetrationNo Pasa-EN 13948
Resistance to static loading>15kgUNE-EN 12730
Resistance to impact>1000mmUNE-EN 12691
Longitudinal resistance to tearing (nail shank)NPDNUNE-EN 12310-1
Transversal resistance to tearing (nail shank)NPDNUNE-EN 12310-1
Joint strength: peel resistance PND-UNE-EN 12316-1
Joint strength: shear resistance450 ± 150-UNE-EN 12317-1
Flexibility at low temperature< -5ºCUNE-EN 1109
Humidity resistance factor20.000-UNE-EN 1931
Dangerous substancesNPD--
Flexibility at low temperature (pliability) after aging+5 ± 5ºCUNE-EN 1109
Flow resistance at elevated temperature after aging120 ±10ºCUN-EN 1110

Pasa = Positive or correct No pasa = Negative PND = No performance determined - = Not necessary

 Addtitional Technical Data

ADDITIONAL DATA VALUEUNITSTANDARD
Mass per unit area (nominal)4.0kg/m²-
Mass per unit area (minimum)3.8kg/m²-
Nominal thickness2.5(SOLAPO)mm-
Flow resistance at elevated temperature>130ºCUN-EN 1110
Dimensional stability at elevated temperature (longitudinal)< 0.6%UNE-EN 1107-1
Dimensional stability at elevated temperature (transversal)< 0.6%UNE-EN 1107-1
Adhesion of granules< 30%UNE-EN 12039

Membranes thickness tolerance: = -0,3 mm, apart from membranes with thickness 2 and 2,4 mm whose tolerance is =-0,2 mm.
Membranes mass per unit area tolerance: -5% (mini) and +10% (maxi) from nominal value.

 Declaration of conformity

DERIVADOS ASFÁLTICOS NORMALIZADOS S.A.
Calle La Granja 3 (28108 - Alcobendas, MADRID)

Membrane of 1 m x 10 m x 4.0 kg/m² composed of polymer modified bitumen (pliability -5ºC) with reinforced polyester felt. Membrane with an upper surface finish of mineral granules and a lower surface finish of polyethylene film. Torch-on application.

This product is according to the Z.A. Annex of the UNE-EN 13707 and UNE-EN 13969.
The roll must be stored upright and protected against atmospheric conditions and dampness. The Application cannot be done under temperatures lower than 0 ºC.

Certificate number CPF: 1035-CPD-ES044104

José Antonio Manzarbeitia Valle
Manager Quality and R&D Manager.
Fontanar, March 01st September 2009

 Standards and Certification

UNE EN 13707 standard.
UNE EN 13969 standard.
CE marking.

 Presentation

PRESENTATIONVALUEUNIT
Length10m
Width1m
Roll surface10m2
Rolls per pallet23rolls
Product Code141805-
  1. mineral protection
  2. polymer modified bitumen (pliability -5ºC)
  3. reinforced polyester felt
  4. polyethylene film

 Warning

The information that appears in the following document makes reference to the uses and utilities of danosa’s products and systems, and it is based on the knowledge that have been learnt until present, by Danosa. This is only possible if products have been stored and used in an appropriate way.
Nevertheless, Danosa is not responsible for unsuitable uses of the products neither any other facts, such as meteorological facts. So Danosa is just responsible for the quality related to the provided products.
Danosa reserves the right to carry out modifications without previous notice.

The values that appear in the technical sheet are the results of the tests that have been performed in our laboratory. April 2012.

Web site: www.danosa.com E-mail: export@danosa.com Phone number: +34 949 888 210 


 Print