Search
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Identification number of the Certification Body: 1035 Membrane of 1 m x 8 m x 4.8 kg/m² composed of polymer modified bitumen with reinforced polyester felt. Both sides are protected by a thermofusible film. Torch-on application.
Pasa = Positive or correct No pasa = Negative PND = No performance determined - = Not necessary
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ADDITIONAL DATA | VALUE | UNIT | STANDARD |
| Mass per unit area (nominal) | 4.8 | kg/m² | - |
| Mass per unit area (minimum) | 4.56 | kg/m² | - |
| Nominal thickness | 4.1 | mm | - |
| Flow resistance at elevated temperature | >130 | ºC | UN-EN 1110 |
| Dimensional stability at elevated temperature (longitudinal) | < 0.6 | % | UNE-EN 1107-1 |
| Dimensional stability at elevated temperature (transversal) | < 0.6 | % | UNE-EN 1107-1 |
| Adhesion of granules | PND | % | UNE-EN 12039 |
Membranes thickness tolerance: = -0,3 mm, apart from membranes with thickness 2 and 2,4 mm whose tolerance is =-0,2 mm.
Membranes mass per unit area tolerance: -5% (mini) and +10% (maxi) from nominal value.
Declaration of conformity
 |
DERIVADOS ASFÁLTICOS NORMALIZADOS S.A.
Calle La Granja 3 (28108 - Alcobendas, MADRID)
Membrane of 1 m x 8 m x 4.8 kg/m² composed of polymer modified bitumen with reinforced polyester felt. Both sides are protected by a thermofusible film. Torch-on application.
This product is according to the Z.A. Annex of the EN 13707 and EN 13969.
The roll must be stored upright. These rolls have to be protected against atmospheric conditions and dampness. The Application cannot be done under temperatures lower than -5 ºC.
Certificate number CPF: 1035-CPD-ES044104
José Antonio Manzarbeitia Valle
Manager Quality and R&D Manager.
Fontanar, September 01st 2009
Standards and Certification
UNE EN 13707 standard.
UNE EN 13969 standard.
CE marking.
DIT 550/10 "ESTERDAN PENDIENTE CERO”.
Presentation
| PRESENTATION | VALUE | UNIT |
| Length | 8 | m |
| Width | 1 | m |
| Roll surface | 8 | m2 |
| Rolls per pallet | 25 | rolls |
| Product Code | 141172 | - |
|
Warning
The information that appears in the following document makes reference to the uses and utilities of danosa’s products and systems, and it is based on the knowledge that have been learnt until present, by Danosa. This is only possible if products have been stored and used in an appropriate way.
Nevertheless, Danosa is not responsible for unsuitable uses of the products neither any other facts, such as meteorological facts. So Danosa is just responsible for the quality related to the provided products.
Danosa reserves the right to carry out modifications without previous notice.
The values that appear in the technical sheet are the results of the tests that have been performed in our laboratory. August 2012.
Web site: www.danosa.com E-mail: export@danosa.com Phone number: +34 949 888 210
 Print
|
